PRODUCT DESCRIPTION
The IPR Valve on a Powerstroke is responsible for controlling pressure in the high-pressure oil system which in turn operates the fuel injectors. The IPR valve (injection pressure regulator) is located on the high pressure oil pump at the front of the engine's valley. Because of the high pressures they are responsible for controlling, the IPR valve o-rings are a semi-common failure which can cause low oil pressure related symptoms as poor idle, stalling and even a no-start conditions.
O-RINGS: While there are other potential causes, such as a failed IPR valve, the o-rings themselves are often at fault and much less expensive to replace.
SCREEN: The IPR valve screen is another common failure point. The screen may become plugged with debris and then be collapsed by the flow of high pressure oil as it tries to flow through the restricted screen. A torn screen will allow debris to enter the IPR valve which may damage the valve.
This kit is a genuine OEM Ford part #3C3Z-9H529-A and carries a factory warranty.
This kit includes:
(1) Backup ring
(1) Orifice O-ring
(1) O-ring seal
(1) IPR Screen
Fitment:
'03-'07 Ford 6.0L F250/350/450/550
'04-'10 Ford 6.0L E-Series Van
'03-'05 Ford 6.0L Diesel Excursions.
FORD OEM PARTS
Ford Motor Company designs and produces OEM parts that meet the same specifications and tolerances as the parts on the vehicle when it was manufactured. These parts meet stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. They are the only parts proven during vehicle development to deliver the intended level of protection as a whole system.
